Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

1004b - power unit overview (page 8 of 9)

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Engine and power unit (899)
10 Engine1004b - power unit overview · page 8 of 9

(Cont. 1004B10)

NameCode
1Puller1.847.035.000
Puller tool separating a front hub pillar from a damper
  1. Unscrew the screws fastening the front hub pillars to the dampers.
Constant velocity joint being separated from the front hub pillar with a puller
  1. Separate the constant velocity joints from the front hub pillars.
  2. Tie the front hub pillars to the dampers.

Tie the drive-shafts to prevent them sliding out of the differential.

Mileage counter transmission gearbox side showing drive-shaft and cable attachment
  1. Separate the mileage counter transmission gearbox side.
Exhaust pipe attachment point on engine/manifold
  • Follow Op. 1076B50 Exhaust PIPE attachment to engine/manifold - R+R.

Cont.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.