Refitting

Note: To facilitate removal of the fuel pump, apply leverage on the edge with a screwdriver.

1. Remove the fuel pump (1a) with the gasket (1b) and the fuel level gauge command(1c).

Refitting

• Install the fuel pump with the gasket and the fuel level gauge in the fuel tank.
• Install the ring-nut.
• Tighten the nuts securing the fuel pump to the fuel tank.
• Connect the fuel delivery hose to the fuel pump.
• Connect the fuel return hose to the fuel pump.
• Connect the electrical connection to the electric fuel pump and level gauge.

• Install the fuel pump access cover and secure it with the screws.
• Complete with Op. 7050A22 Rear seat CUSHION - R.R.
• Connect the negative (-) battery terminal

• Close the engine compartment.
• Fill the fuel tank with the specified fuel.

1040A74 - INERTIA SWITCH FOR INTERRUPTION OF ELECTRIC PUMP SUPPLY CIRCUIT - R.R.

Removal

• Open the engine compartment.
• Disconnect the negative (-) battery terminal.

(Cont..)