Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Fuel tank and pipes (899) › Refitting
10 EngineRefitting

(Op. 1040A74 continued)

  1. The inertia switch is to be found under the central part of the dashboard.
Diagram showing the location of the inertia switch (1) under the dashboard
  • Remove the protective covering from the inertia switch.
  1. Loosen the screws that fasten the inertia switch to the support.
  2. Disconnect the electrical connection of the inertia switch
NameConnector
2Inertia switchI50
  1. Remove the inertia switch.
Diagram showing the inertia switch (1) being removed from its support (3), with the electrical connector (2) disconnected

Refitting

  • Connect the electrical connection to the inertia switch
NameConnector
-Inertia switchI50
  • Tighten the screws securing the inertia switch to the support.
  • Install the protective cover on the inertia switch.
  • Connect the negative (-) battery terminal
NameConnector
-BatteryA1
  • Close the engine compartment.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.