Operations
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Fuel tank and pipes (899) › Operations
10 EngineOperations · page 1 of 2
OPERATIONS
1040A20 - FUEL TANK - R.R. AND DECANTING OF FUEL FOR VERSIONS WITH EVAPORATION CONTROL SYSTEM
Removal
- Position the vehicle on a hoist.
- Open the engine compartment.
- Disconnect the negative (-) battery terminal.
| Name | Connector | |
|---|---|---|
| - | Battery | A1 |
- Suck up the fuel from the tank using a suitable tool.
- Carry out Op. 7050A22 CUSHION of rear seat - R.R.
- Unscrew the nuts (1a) of the cover giving access to the fuel pump unit (1b) and remove .
- Disconnect the electric fuel pump and level gauge electrical connections
| Name | Connector | |
|---|---|---|
| 1 | Electric fuel pump and level gauge | N40 |
- Withdraw the return pipe from the snap-link.
- Remove the rear right wheel (see Op. 4450B11 WHEEL (one) rear - R+R).
- Raise the vehicle.
- Carry out Op. 1076B20 Rear exhaust SILENCER - R.R.
- Disconnect the fuel delivery hose between the tank and filter from the snap-link.
- Disconnect the fuel lines from the fuel tank valve to the fuel vapour recovery reservoir from the snap-link.
- Disconnect the active charcoal filter hose from the fuel vapour recovery reservoir.
- Loosen screws (4a) securing the fuel filter (4b) to the bracket on the tank (4c).
(Cont..)
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.