Workshop Manuals Factory service & repair Fiat
01 00 General information and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 27 Axle06 33 Braking system07 41 Steering08 44 Suspension and wheels09 50 Auxiliary units10 55 Electrical equipment11 70 Bodywork12 Diagnosis13 Tests14 Wiring diagrams
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Operations (page 2 of 2)

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Fuel tank and pipes (899)
10 EngineOperations · page 2 of 2

(Op. 1040A20 continued)

  1. Move the fuel filter.
  2. Remove the right-hand end of the hand brake cable from the rear right-hand handbrake drum brake control.
Diagram showing the fuel filter (1) and a hose (2) in the engine bay area.
  1. Disconnect the fuel filler pipe from the fuel tank.
Diagram showing the fuel filler pipe connection (1) near the fuel tank.
  1. Position a hydraulic jack under the fuel tank.
  2. Loosen screws (2a) securing the fuel tank (2b) to the body.
  3. Loosen screw (3a) and the nut (3b) securing the front bracket of the fuel tank to the body.
Diagram showing the fuel tank (2b) with securing screws (2a), a hydraulic jack (1) positioned underneath, and the front bracket fasteners (3a, 3b).
  1. Lower the fuel tank a little to withdraw the overflow pipe.
Diagram showing the fuel tank being lowered to withdraw the overflow pipe (1).

(Cont..)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.