Pedal assembly

Pedal assembly

(Op.3330B14 continued)

• Remove the clutch control lever on the engine.
• Remove the accelerator cable from the throttle on the engine.

1. Remove the brake booster rod from the brake pedal.
2. Remove the fastening nuts from the pedals.

• Remove the clutch and accelerator cables from the pedals.
• Disconnect the brake switch electric connection.

• Remove the pedals.

Overhaul

1. Remove the nut.
2. Remove the pin supporting the brake and the clutch.
3. Remove the brake and clutch pedals, the spring, the bushing and the shims.
4. Remove the accelerator pedal fastening spring.
5. Remove the accelerator pedal, the bushing and the shim.

• Check the component conditions and replace any worn parts.
• Lubricate the bushing, the bushing seats and the pins.
• Fit the brake and clutch pedals on the pedal support with their respective springs and bushing.
• Fit the pin.
• Torque the nut

• Refit the accelerator pedal, bushing and shim.
• Refit the accelerator pedal spring.

(Cont..)