Reassembly

(Op. 3330E10 continued)

1. Remove the front brake caliper hose from the bracket.
2. Remove the hose from the front brake calipers.

Reassembly

• Torque the hose to the front brake caliper

• Fit the front brake caliper hose on the bracket.
• Holding the hose with the wrench, torque the pipe with the following tool

• Fit the clip on the union pipe between the pipe and the hose.
• Complete with Op. 3330A10 BRAKE FLUID - Checking level and topping-up (if required).
• Complete with Op. 3330A18 Front or rear HYDRAULIC BRAKE SYSTEM - Bleeding.
• Complete with Op. 4450B10 Front WHEEL (one) - R.R.
• Remove the vehicle from the shop jack.

3330E42 - INTERMEDIATE HOSE (ONE) TO REAR BRAKES - R.R. AND BLEEDING

Removal

• Position the vehicle on a shop jack.
• Perform Op. 4450B11 Rear WHEEL (one) - R.R.

1. Suck the brake fluid from the reservoir with a syringe.

• Remove the rear drum brake cylinder bleeder valve cap.

1. Insert a clear plastic tube in the bleeder valve.
2. Place the other end in a container.

(Cont..)