Reassembly
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Hydraulic brake system › Reassembly
33 Braking systemReassembly
(Op. 3330B14 continued)
Reassembly
- Reconnect the brake switch electric connection
| Name | Connector |
|---|---|
| Brake pedal switch | I30 |
- Fit the clutch and accelerator cables to the pedals.
- Fit the pedals.
- Torque nuts
| Fastening | Component | Ø | Value (daNm) |
|---|---|---|---|
| Nut | PEDALS | M8 | 1.8 |
- Join the brake booster to the brake pedal with its specific washer and split pin.
- Fit the clutch cable to the control lever on the engine.
- Fit the accelerator cable to the throttle on the engine.
- Connect the negative (-) battery terminal
| Name | Connector |
|---|---|
| Battery | A1 |
- Close the engine compartment.
3330B30 - RUBBER PEDAL COVER (ONE) - REPLACE
- Remove the reubber pedal cover from the pedal.
- Fit the new rubber pedal cover on the pedal.
Parts & tools for this job For 1998 Fiat Seicento
- PARTBrake padsSearch: Fiat Seicento 1998 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.