Reassembly

(Op. 3330C30 continued)

Reassembly

• Fit the brake fluid reservoir on the master cylinder unit (pump).
• Complete with Op. 3330A10 BRAKE FLUID - Checking level and topping-up (if required).
• Complete with Op. 3330A14 HYDRAULIC BRAKE SYSTEM - Bleeding
• Complete with Op. 4450B12 Front WHEELS (two) - R.R.
• Complete with Op. 4450B13 Rear WHEELS (two) - R.R.
• Remove the vehicle from the shop jack.

3330C66 - BRAKE FORCE DISTRIBUTOR - R.R. - ADJUSTMENT AND BLEEDING

Removal

• Position the vehicle on a shop jack.
• Perform Op. 4450B12 Front WHEELS (two) - R.R.
• Perform Op. 4450B13 Rear WHEELS (two) - R.R.
• Perform Op. 3330C30 Brake fluid RESERVOIR - R.R. and washing the inside.

1. Remove the brake force distributor pipes from the master cylinder (pump) with the following tool.

1. Remove the brake force distributors from the rear brakes with the following tool.

1. Remove the brake force distributor bracket nuts.

1. Remove screws (1a) and remove the brake force distributors (1b) from the bracket.

(Cont..)