Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)06 · 33 Braking system
06 · General

Reassembly

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Hydraulic brake system › Reassembly
33 Braking systemReassembly · page 1 of 2
  • Unscrew the bleed screw.
  • Push the brake pedal to the end of its stroke.
  • Close the bleeder valve once the brake pipe is empty.
  1. Remove the clip from the union pipe between the intermediate pipe and the hose.
  2. Holding the intermediate pipe with wrench (2a), unscrew the pipe with tool (2b)
NameCode
2bWrench1.856.132.000
Diagram showing removal of a clip from a union pipe between a rear cylinder pipe and an intermediate hose, using tools labeled 2a and 2b.
  1. Remove the clip from the union pipe between the rear cylinder pipe and the intermediate hose.
  2. olding the intermediate hose with wrench (2a), unscrew the pipe with tool (2b)
NameCode
2bWrench1.856.132.000
Diagram showing a clip being removed from a union pipe on an intermediate hose using a wrench (2a) and a tool (2b).

Reassembly

  • Holding the intermediate hose with the wrench, torque the pipe to the rear cylinder with the following tool.
NameCode
-Wrench1.856.132.000
FasteningComponentØValue (daNm)
-Union pipePIPE TO REAR CYLINDERSM101.1
  • Fit the clip on the union pipe between the pipe and the intermediate hose.
  • Holding the intermediate hose with the wrench, torque the pipe.
NameCode
-Wrench1.856.132.000
FasteningComponentØValue (daNm)
-Union pipeBRAKE FORCE DISTRIBUTOR PIPEM101.1
  • Remove the clip from the union pipe between the pipe and the hose.
  • Complete with Op. 3330A10 BRAKE FLUID - Checking level and topping-up (if required).

(Cont..)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.