Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)06 · 33 Braking system
06 · General

Reassembly

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Hydraulic brake system › Reassembly
33 Braking systemReassembly

(Op. 3330C66 continued)

  1. Remove the brake force distributors with the following tool.
NameCode
2Wrench1.856.132.000
Diagram showing brake force distributor bracket assembly with callouts 1a, 1b, and wrench 2

The brake force distributors cannot be adjusted and must not be tampered with.

Reassembly

  • Fit the brake force distributors on the bracket and torque screws
FastenerComponentØValue (daNm)
-ScrewBRAKE FORCE DISTRIBUTORSM82.4
  • Temporarily screw the brake force distributors to the master cylinder (pump) pipes.
  • Torque the brake force distributor bracket nuts to the master cylinder
FasteningComponentØValue (daNm)
-NutBRAKE MASTER M8 CYLINDER (PUMP)2.0
  • Temporarily screw the brake force distributors to the rear brake pipes.
  • Temporarily screw the brake force distributor pipes to the master cylinder (pump).
  • Torque the brake force distributor pipes to the master cylinder.
NameCode
-Wrench1.856.132.000
FasteningComponentØValue (daNm)
-Union pipeBRAKE PIPESM101.1
  • Complete with Op. 3330C30 Brake fluid RESERVOIR - R.R. and washing inside.
  • Complete with Op. 3330A10 BRAKE FLUID - Checking level and topping-up (if required).
  • Complete with Op. 3330A14 HYDRAULIC BRAKE SYSTEM - Bleeding
  • Complete with Op. 4450B12 Front WHEELS (two) - R.R.
  • Complete with Op. 4450B13 Rear WHEELS (two) - R.R.
  • Remove the vehicle from the shop jack.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.