list of operations (page 2 of 2)

1. Slacken the rear wheel hub nut.

• Lower the handbrake lever.
• Raise the vehicle.
• Carry out Op. 3320B30 Rear brake DRUM (one) lh or rh - R+R.
• Carry out Op. 4450D10 One rear wheel HUB, lh or rh - R+R. with wheel removed.

1. Disconnect the end of the handbrake cable from the rear drum handbrake control.

1. Slacken the rigid pipe from the rear drum brake cylinder using the tool

1. Remove the clip from the union pipe between the rear cylinder pipe and the intermediate hose.
2. Holding the intermediate pipe with wrench (2a), unscrew the pipe with tool (2b)

• Remove the rigid pipe to the rear drum brake cylinder from the clamp on the wishbone and remove it.

(Cont.d)