Workshop Manuals Factory service & repair Fiat
01 00 General information and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 27 Axle06 33 Braking system07 41 Steering08 44 Suspension and wheels09 50 Auxiliary units10 55 Electrical equipment11 70 Bodywork12 Diagnosis13 Tests14 Wiring diagrams
Fiat Seicento Factory Service Manual (1998-2010)09 · 50 Auxiliary units
09 · General

Fan Switch and Fan Motor Resistor

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Heater › Fan Switch and Fan Motor Resistor
50 Auxiliary unitsFan Switch and Fan Motor Resistor

Fan Switch and Fan Motor Resistor

(Cont. Op. 5020A40)

  1. Unscrew screws (2a)and remove the fan switch (2b)
Diagram showing the fan switch assembly with callout labels 2a, 2b, and 1 next to an electrical connector symbol.

Refitting

  • Assemble the fan switch and fasten with the screws.
  • Connect the climate control fan control electrical connection
NameConnector
-Climate control fan controlH81
  • Complete with Op. 5020A10 HEATER BOX - R.R.
  • Complete with Op. 5050B38 FRONT WINDSCREEN WIPER unit - R.R. or repair.
  • Complete with Op. 5530B10 BATTERY - R.R.
  • Connect the negative (-) battery terminal
NameConnector
-BatteryA1
  • Remove the body protection cover.
  • Close the engine compartment.
  • Remove the vehicle from the shop jack.

5020A44 - HEATER FAN MOTOR RESISTOR - R.R.

Removal

  • Open the engine compartment.
  • Assemble the body protection covers.
  • Disconnect the negative (-) battery terminal.
NameConnector
-BatteryA1
  1. Partially remove the engine compartment gasket.
  2. Unscrew screws (2a)of the soundproofing guard (2b) and remove it.
Diagram of the engine compartment area showing the soundproofing guard with callout labels 1, 2a, and 2b.
  1. Disconnect the passenger compartment fan adjustment resistor electrical connection
NameConnector
1Passenger compartment air fan adjustment resistorO30
  1. Unscrew the fastening screws and remove the fan motor resistor.
Diagram showing the fan motor resistor assembly with callout labels 1 and 2 next to an electrical connector symbol.

Refitting

  • Assemble fan motor resistor and fasten with the screws.
  • Connect the passenger compartment fan adjustment resistor electrical connection
NameConnector
-Passenger compartment air fan adjustment resistorO30
  • Assemble the soundproofing guard and fasten with the screws.

(Cont.d.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.