Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)09 · 50 Auxiliary units
09 · General

Operations

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Heater › Operations
50 Auxiliary unitsOperations · page 1 of 2
CodeOperationValidity
5020A10Heater box - R.R.
5020A24Heater box - Disassembly and Reassembly at the bench
5020A34Heater fan motor - R.R. with heater box removed
5020A40Heater fan motor switch - R.R.
5020A44Heater fan motor resistor - R.R.
5020A50Heater radiator - R.R.

OPERATIONS

5020A10 - HEATER BOX - R.R.

Removal

  • Position the vehicle on a shop jack.
  • Open the engine compartment.
  • Assemble the body protection covers.
  • Disconnect the negative (-) battery terminal.
NameConnector
-BatteryA1
  • Carry out Op. 5530B10 BATTERY - R.R.
  • Unscrew the engine coolant tank plug.
  • Raise the vehicle.
  1. Unscrew the engine compartment protection screws.
  2. Remove la engine compartment protection.
Diagram showing the removal of the engine compartment protection, with callout numbers 1 and 2 indicating screws and the panel respectively.
  1. Take out the lower sleeve from the radiator, drain off part of the engine coolant into a suitable container and reconnect the sleeve.
Diagram showing the lower sleeve connection to the radiator and surrounding components.
  • Assemble the engine compartment protection and fasten with its screws.
  • Lower the vehicle and remove from the shop jack to be able to work more easily inside the car.
  • Unscrew the fastening nut of the absolute pressure sensor and move it.
  1. Take out the fuses/relay group from the support and move it without disconnecting the electrical connections.
  2. Take out the engine compartment gasket.

(Cont.d.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.