Reassembly (page 2 of 2)

Make

Fiat

Model

Seicento Factory Service Manual

Year

1998–2010

Section

Body panels, replacement and repair

70 BodyworkReassembly · page 2 of 2

(Continue Op. 7090G90)

3. With MIG welder carry out arc welding and weld floor connection.

• Correct possible plate deformations with shaped stake and hammer.

1. Clean zones affected by welding with disk grinding wheel.

• Apply inhibitor on zones affected by welding.
• Seal zones between spare part and car.
• Start painting phase following prescribed cycle.
• Start waxing phase following prescribed cycle.

Original page

View full sizeFit to page

11 Body & interior