D03 Engine running irregularly (sawing) (page 2 of 2)
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Engine
DiagnosisD03 Engine running irregularly (sawing) · page 2 of 2
| Step | Validity | Operation to be performed | Test results | ||
|---|---|---|---|---|---|
| OK | ⚠ | 🔧 | |||
| 4 | CHECK FUEL PRESSURE Check fuel supply pressure PROCEDURE OP. 0510C10 |
All OK Go to Step 5 |
Problems found Incorrect pressure |
Intervention Check the circuit components in sequence: – fuel filter PROCEDURE OP. 1044B10 – pressure regulator – fuel hoses PROCEDURE 1040 B |
|
| 5 | CHECK CORRECT OPERATION Check the fault is no longer present |
All OK End of test |
Problems found – |
Intervention – |
|
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.