Workshop Manuals Factory service & repair Fiat
01 00 General information and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 27 Axle06 33 Braking system07 41 Steering08 44 Suspension and wheels09 50 Auxiliary units10 55 Electrical equipment11 70 Bodywork12 Diagnosis13 Tests14 Wiring diagrams
Fiat Seicento Factory Service Manual (1998-2010)12 · Diagnosis
12 · Diagnostics

H01 Vehicle drift

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Steering › H01 Vehicle drift
DiagnosisH01 Vehicle drift

Diagnosis table

H01 Vehicle drift

Driving on a straight road, the car tends to move rightwards and/or leftwards.
If required, run a road test on a straight, flat road without transverse slopes.
Check the actual deviation of trajectory by loosening - with extreme caution - the hold on the steering wheel.
If the fault occurs when braking, also see table H02

Preliminarily check:
– tyre pressure, type and conditions
– correct tyre assembly
– correct wheel fastening

Step Validity Operation to be performed Test results
OK ⚠ 🔧
1 CHECK UNDERBODY
Inspect the underbody.
Check there are no accidental knocks, dents or bent suspension arms
All OK
Go to Step 2
Problems found
Damage to the front suspension
Intervention
Restore or replace the damaged parts
2 CHECK GEOMETRY
Check the vehicle geometry and characteristic angles of the wheels,
PROCEDURE OP. 4450A
All OK
Go to Step 3
Problems found
Incorrect geometry
Intervention
Restore correct vehicle geometry
Incorrect angles Restore correct angles
3 CHECK WHEELS
Check:
– correct wheel balancing
– “free rotation” of the wheels (correct assembly of brake calipers/ drums)
All OK
Go to Step 4
Problems found
Wheels not balanced
Intervention
Balance the wheels
PROCEDURE OP. 4450B46
Incorrect brake caliper/drum assembly Restore correct assembly or replace the brake calipers
3310A32 (front)
4 CHECK WHEEL BEARINGS
Check intactness and operation of wheel hub bearings
All OK
Go to Step 5
Problems found
Worn or damaged bearing
Intervention
Replace the wheel hub bearing
PROCEDURE OP. 4450C32 (front) or 4450D36 (rear)

(Cont..)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.