Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)12 · Diagnosis
12 · Diagnostics

Vehicle drift

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Steering › Vehicle drift
DiagnosisVehicle drift

Vehicle drift

Step Validity Operation to be performed Test results
OK ⚠ 🔧
5 CHECK BUSHES AND BUFFER PADS, FRONT Check intactness of bushes and pads in sequence:
– steering unit supports
– flexible support of wishbones		 All OK Problems found Intervention
Go to Step 6 Steering unit supports worn or damaged Replace the supports PROCEDURE OP. 4120A40
Wishbone supports worn or damaged Replace the supports PROCEDURE OP. 4410B40, 4410B68
1108 – stabiliser bar buffer pads Stabiliser bar buffer pads worn or damaged Replace the buffer pads PROCEDURE OP. 4410C10
6 CHECK ENGINE SUPPORT Check intactness and centring of engine fastening rods All OK Problems found Intervention
Go to Step 7 Engine support faults Settle the fastenings: loosen screws, centre them in their seats and tighten them to the specified torque PROCEDURE 1008A
7 CHECK DIFFERENTIAL Check differential intactness: in particular, check there is no play All OK Problems found Intervention
Go to Step 8 Faulty differential Overhaul or replace the differential PROCEDURE OP. 2110D20
8 CHECK CORRECT OPERATION Check the fault is not longer present All OK Problems found Intervention
End of test – –

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.