Subgroup contents

• WARNINGS
• IMPORTANT NOTES
• GROUP TESTS

Subgroup contents

WARNING

All operations are to be carried out with utmost care and attention to avoid personal injuries.

For some procedures the use of specific tools is indicated. The use of these tools is necessary to be able to operate in safety.

Follow all safety precautions in force in the workshop. Where relevant, follow the specific safety precautions specified in this Manual to avoid dangerous situations.

When using chemical products strictly observe the precautions indicated on the safety card that the supplier is to hand over to the user (for Italy in accordance with D.M. n. 47/1992).

IMPORTANT NOTES

All operations are to be carried out with utmost attention and care to avoid damage to the vehicle.

Use adhesive paper or clean cloths to suitably protect those parts of the engine that, left uncovered after disassembly, have openings that could allow the entry of dust or foreign elements.

List of group tests

GROUP TESTS

A - LOCATING WIND NOISES (PRELIMINARY LOCATION)

• Test on the road gradually bringing the car to the speed at which the noise starts.
• Locate the area the noise comes from.
• Tape the various areas with bodybuilder's adhesive paper: when the noise disappears, the area that has just been taped is that where the wind noise originates:

• front doors (see 7005 Test A)
• rear tailgate(see 7015 Test A)
• engine bonnet (see 7025 Test A)
• windscreen, rear window and side windows (see 7035 Test A)
• underbody
• sunroof