Unit tests

UNIT TESTS

A - LOCATING REAR SIDE OPENING WINDOW WIND NOISES

- Tape the various areas indicated in the figure with body builder's adhesive paper.

• Test on the road : if the noise persists, check that the rear side window is properly taped.
• Remove the adhesive paper from zone A and repeat the road test: if the noise persists, check that the hinge is properly fastened to the body.
• Remove the adhesive paper from zone B and repeat the road test: if the noise persists check that the opening/closing device operates correctly.
• Check the seal and if necessary replace (see PROCEDURE OP. 7035D18) and adapt the seals and housings to restore the seal (see PROCEDURE OP. 7035D22).