Description
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Connectors › Description
Wiring diagramsDescription
DESCRIPTION
Component types contents
| Code | Description | Code | Description |
|---|---|---|---|
| A | Start-up - Recharging | J | Relays |
| B | Valves and fuse carriers | K | Sensors and senders |
| C | Earths | L | Solenoids and solenoid valves |
| D | Intermediate connections | M | Electronic, intermittent and timing devices |
| E | Clusters and light indicators and horns | N | Electric motors and actuators |
| F | Exterior lighting | O | Resistors and rheostats |
| G | Interior lighting | P | Other users |
| H | Manual electrical controls | Q | Safety devices |
| I | Switches | R | Diagnostics |
DESCRIPTION
This chapter describes all the connectors of the car electrical system, listed in order of their codes according to the component type.
The following information is given for each connector:
- identity code
- name
- validity
- wiring to which it belongs
- colour of connector
- cross section and colour of cables coming from each pin (the cable cross section is indicated if it differs from the standard - 0.5mm²)
- cable present on any junction nodes (ultrasonic weldings)
- cable destination (connector and pin)
- description of connector indicating the pin numbering. (the connectors are shown from the cable inlet side).
If there is a junction node on a cable, all the connected connectors with cables coming from the actual node are indicated as the destination.
Parts & tools for this job For 1998 Fiat Seicento
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.