Manual-automatic shift
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Gear shift › Manual-automatic shift
Fault diagnosisManual-automatic shift
MANUAL-AUTOMATIC SHIFT
The vehicle switches to automatic by itself when driving in manual
| Results of the tests | ||||
| 0 | CONTROL UNIT ERRORS CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
Check that there are no errors in the control unit In particular:
| Continue to Step 3 | Presence of one or more of the errors included in the list | Continue to Step 1 | |
| 1 | CHECKS ON FAULTS DETECTED | All OK | Problems met | Operation |
| Check the faults See Test 2127I What to do depending on the error' present in the Selespeed control unit No accelerator pedal information. | End of diagnosis | The state displayed is not correct (Lever switch error 0/1/2/3 and/or Lever switch error - Check lever) | Check the connections, the continuity of the wiring and the gearlever Continue to Step 2 | |
| There is no change of state and/or the word 'AUTO is not displayed (Lever switch error - Check auto button) | Check the button and the wiring Continue to Step 2 | |||
| 2 | AFTER THE CHECKS ON FAULTS DETECTED | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | The fault persists | Continue to Step 5 | |
| 3 | CHECK THAT THE LEVER AND AUTO BUTTON ARE WORKING PROPERLY | All OK | Problems met | Operation |
| Check that the lever and auto button are working properly See Test 2127G CHECK ON BUTTONS ON STEERING WHEEL AND GEAR LEVER | Continue to Step 5 | The lever or the button is not working properly | Check the state of the connections and the wiring. Repair/replace the part that is not working. Continue to Step 4 | |
| There is no change of state and/or the word 'AUTO is not displayed | Check the button and the wiring Continue to Step 4 | |||
| 4 | AFTER THE CHECK ON THE CORRECT OPERATION OF THE LEVER AND AUTO BUTTON | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | The fault persists | Continue to Step 5 | |
| 5 | THE FAULT PERSISTS | All OK | Problems met | Operation |
| Contact Technical Service for further information on the problem | End of diagnosis | Fault persists | Search for the fault starting from another symptom' | |
Parts & tools for this job For 2001 Fiat Stilo
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Stilo
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.