Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Service news bulletins24 Special tools
Lancia Thesis Factory Service Manual (2002-2009)22 · Fault diagnosis
22 · Diagnostics

Climate control not working in any circumstances

Make
Lancia
Model
Thesis Factory Service Manual
Year
2002–2009
Section
Climate control › Climate control not working in any circumstances
Fault diagnosisClimate control not working in any circumstances

CLIMATE CONTROL NOT WORKING IN ANY CIRCUMSTANCES

The climate control system will not work when the controls are operated.

STEPOPERATIONS TO BE CARRIED OUTTEST RESULTS
0PRELIMINARY CHECKALL OKPROBLEMS ENCOUNTEREDACTION

Check:

  • condition of climate control system fuses

    (Wiring Diagram ) E6020 AIR CONDITIONING

  • Correct climate control system pressure
Move on to Step1. Fuses blown.1. Change the blown fuses.
2. Pressure not correct

2. Eliminate leaks and top up climate control system to correct level

See in Op. 5040A10 Air conditioning coolant circuit - Drying and Repressurizing

1CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION

With the tester (Examiner or other instrument) connected, check the CAN network information for:

  • no control unit not activated;
  • that there are no faulty control units;
  • no control unit with faulty CAN line;
Move on to StepPresence of faultsContinue following the instructions for the diagnostic equipment
2CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION

Keeping the diagnostic equipment (Examiner or other instruments) connected to the diagnostic socket, check:

  • that there are no faults in the climate control system node
Move on to Step1. Presence of faults1. Continue following the instructions for the diagnostic equpiment
2. No dialogue with the control unitMove on to Step
3CHECK CONTINUITYALL OKPROBLEMS ENCOUNTEREDACTION

Check:

  • continuity of serial line K

    (Wiring Diagram ) E6020 AIR CONDITIONING

Move on to StepConnections not correct

Restore the connections

(Wiring Diagram ) E6020 AIR CONDITIONING

4CHECK ON CORRECT OPERATIONALL OKPROBLEMS ENCOUNTEREDACTION
Check that the fault is no longer presentFault persists

Replace the climate control system control unit

See in Op. 5040D18 Air conditioning CONTROL UNIT - R.R.

Parts & tools for this job For 2002 Lancia Thesis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.