Excessive exhaust fumes
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Climate control › Excessive exhaust fumes
EXCESSIVE EXHAUST FUMES
There are excessive fumes at the additional heater exhaust when it is working.
| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS | ||
|---|---|---|---|---|
| 0 | PRELIMINARY CHECKS | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check the condition of the air intake duct | Move on to Step | Duct obstructed | Restore operation | |
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket and check:
| Move on to Step | 1. Presence of faults | 1. continue following the instructions for the diagnostic equipment | |
| 2. Air intake motor faulty | Move on to Step | |||
| 3. Spark plug faulty | Move on to Step | |||
| 4. Fuel pump faulty | Move on to Step | |||
| 2 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Keeping the diagnostic equipment (Examiner or other instruments) connected to the diagnostic socket, check:
| Move on to Step | Operation not correct | Move on to Step | |
| 3 | AIR INTAKE MOTOR ELECTRICAL SYSTEM CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check the condition of the electrical circuit from the additional heater control unit to the air intake motor (Wiring Diagram ) E6020 AIR CONDITIONING | Move on to Step | 1. Connections not correct | 1. Restore the connections (Wiring Diagram ) E6020 AIR CONDITIONING | |
| 2. Connections correct, air intake motor not activated | Move on to Step | |||
| 4 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Keeping the diagnostic equipment (Examiner or other instruments) connected to the diagnostic socket, check:
| Move on to Step | Operation not correct | Move on to Step | |
| 5 | SPARK PLUG ELECTRICAL SYSTEM CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check the condition of the electrical circuit from the additional heater control unit to the spark plug (Wiring Diagram ) E6020 AIR CONDITIONING | Move on to Step | 1. Connections not correct | 1. Restore the connections (Wiring Diagram ) E6020 AIR CONDITIONING | |
| 2. Connections correct, spark plug not activated | Move on to Step | |||
| 6 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Keeping the diagnostic equipment (Examiner or other instruments) connected to the diagnostic socket, check:
| Move on to Step | Operation not correct | Move on to Step | |
| 7 | FUEL PUMP ELECTRICAL SYSTEM CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check the condition of the electrical circuit from the additional heater control unit to the fuel pump (Wiring Diagram ) E6020 AIR CONDITIONING | Move on to Step | 1. Connections not correct | 1. Restore the connections | |
| 2. Connections correct, electric pump not activated | Move on to Step (Wiring Diagram ) E6020 AIR CONDITIONING | |||
| 8 | ADDITIONAL HEATER ELECTRICAL SYSTEM CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check that the additional heater control unit supply and earth is correct (Wiring Diagram ) E6020 AIR CONDITIONING | Move on to Step | Connections not correct | Restore the connections (Wiring Diagram ) E6020 AIR CONDITIONING | |
| 9 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check that the fault is no longer present | Fault persists | Replace supplementary heater unit | ||
Parts & tools for this job For 2002 Lancia Thesis
- PARTExhaust gasketSearch: Lancia Thesis 2002 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.