Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General specification data03 Engine tuning data04 General fitting reminders05 Lubricants, fluids and capacities06 Maintenance07 Engine08 Emission control09 Fuel system10 Cooling system11 Manifold and exhaust system12 Transfer gearbox13 Automatic gearbox14 Propeller shafts15 Rear axle and final drive16 Front axle and final drive17 Steering18 Front suspension19 Rear suspension20 Brakes21 Wheels and tyres22 Chassis and body23 Heating and ventilation24 Air conditioning25 Wipers and washers26 Electrical27 Instruments
Land Rover Defender 90 Workshop Manual (NAS)17 · Steering
17 · Steering & suspension

Steering damper

Make
Land Rover
Model
Defender 90 Workshop Manual (NAS)
Section
Repair › Steering damper
SteeringSteering damper

STEERING DAMPER

Service repair no - 57.55.21

Remove

  1. Raise vehicle on a ramp [hoist].
Steering damper – Raise vehicle on a ramp [hoist].
  1. Remove 2 nuts securing steering damper to chassis member and collect washer.
  2. Remove nut and bolt securing steering damper to drag link.
  3. Release steering damper from drag link and chassis member and remove.

Refit

  1. Position damper to chassis member and drag link.
  2. Fit bolt and new nut securing damper to drag link and tighten.
  3. Fit washer and nuts securing steering damper to chassis and tighten.
  4. Lower vehicle.

Parts & tools for this job For Land Rover Defender

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.