Refit rear wiper motor (page 2 of 2)
- Make
- Land Rover
- Model
- Defender 90 Workshop Manual (NAS)
- Section
- Repair
Wipers and washersRefit rear wiper motor · page 2 of 2
Refit
- Locate wiper motor drive spindle through aperture in rear door.
- Position wiper motor mounting bracket and secure to rear door. Tighten bolt to 23 Nm, 17 lbf/ft.
- Reconnect harness multi-plug.
- Secure drive spindle to door.
- Fit wiper motor cover.
- Align wiper arm to bottom of heater element and push arm onto spindle, tighten nut and fit end cap.
- Fit spare wheel. Tighten retaining nuts to 130Nm, 95 lbf/ft.
Parts & tools for this job For Land Rover Defender
- PARTWiper bladesSearch: Land Rover Defender wiper blades
- PARTWasher pumpSearch: Land Rover Defender washer pump
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.