300Tdi Defender
REAR AXLE AND FINAL DRIVE
11
OVERHAUL
Refit
7. Clean hub and fit inner and outer bearing tracks.
8. Pack hub inner bearing with grease and fit to
hub.
9. With lip side leading, fit a new seal flush with
rear face of hub. Using service tool LRT-54-003
(LST137) seal replacer and drift. Apply grease
between seal lips.
10. Assemble brake disc to hub, line up reassembly
marks. Applying Loctite 270, fit and tighten
retaining bolts to
73 Nm (54 lbf/ft).
11. Pack hub outer bearing with grease and fit to
hub.
12. Fit rear hub assembly
See Repair, Rear hub
assembly .