300Tdi Defender
51
REAR AXLE AND FINAL DRIVE
10
OVERHAUL
REAR HUB ASSEMBLY - 90
Service repair no - 64.15.13.
1. Remove rear hub
See Repair, Rear hub
assembly .
2. Remove outer bearing.
3. Mark, for reassembly, position of hub to brake
disc.
4. Remove 5 bolts and separate hub from brake
disc.
WARNING: A maximum of two road wheel
retaining studs can be renewed. Should
more studs be unserviceable fit new hub
with studs.
5. Remove grease seal and inner bearing from
hub.
6. Remove inner and outer bearing tracks.
REAR HUB COMPONENTS - 90
1. Axle shaft.
2. Axle shaft joint washer.
3. Axle shaft retaining bolt.
4. Lock nut.
5. Lock washer.
6. Hub adjusting nut.
7. Spacing washer.
8. Outer bearing.
9. Hub.
10. Inner bearing.
11. Grease seal.
12. Brake disc.
13. Disc retaining bolt.
