Discovery II
MANUAL GEARBOX - R380
REPAIRS
37-21
Seal - input shaft
$% 37.23.06
Remove
1. Remove gearbox assembly.
2. Remove retaining peg and remove release
bearing.
3. Remove bolt securing clutch release fork,
remove retaining clip and remove clutch
release fork.
4. Remove 2 bolts securing release bearing
sleeve and remove bearing sleeve.
5. Remove 6 bolts securing bell housing and
remove bell housing.
6. Remove and discard 6 bolts securing oil seal
housing and remove housing.
7. Using a soft metal drift, carefully remove input
shaft front bearing track from housing.
8. Remove oil seal from housing.