Discovery II
STEERING
57-52
REPAIRS
Steering wheel
$% 57.60.01.30
Remove
1. Remove drivers airbag.
2. Disconnect horn multiplug.
3. Centralise steering wheel with road wheels in
straight ahead position.
4. Restrain steering wheel and loosen self locking
nut securing steering wheel to column.
5. Release steering wheel from column.
6. Remove and discard self locking nut.
7. Remove steering wheel.
8. Attach tape across edge of rotary coupler to
retain correct setting.
9. Release 2 clips securing each horn button to
steering wheel.
10. Remove screw securing horn earth lead to
steering wheel.
11. Disconnect radio and cruise control multiplugs.
12. Remove 2 screws securing radio switches to
steering wheel.
13. Remove radio switches from steering wheel.
14. Remove 2 screws securing cruise control
switches to steering wheel.
15. Remove cruise control switches from steering
wheel.
16. Remove horns from steering wheel.
Refit
1. Fit horn switches to steering wheel and secure
with clips.
2. Fit and tighten screw securing horn earth lead
to steering wheel.
3. Fit cruise control switches to steering wheel
and secure with screws.
4. Fit radio switches to steering wheel and secure
with screws.
5. Connect radio and cruise control multiplugs.
6. Remove tape from rotary coupler.
7. Ensure road wheels are in straight ahead
position and indicator cancelling cam are
aligned horizontally.
8. Fit steering wheel to column.
9. Connect horn multiplug.
10. Fit and tighten new self locking nut securing
steering wheel to column to 43 Nm (32 lbf.ft).
