L322 Range Rover Service Procedures
FINAL DRIVE
51-6
REPAIRS
Gasket - cover - rear - differential
$% 51.15.05
Remove
1. Remove differential assembly.
FINAL DRIVE, REPAIRS, Differential
2. Remove 8 bolts securing differential rear cover.
3. Remove rear cover.
4. Remove and discard gasket.
Refit
1. Clean rear cover and mating face on
differential.
2. Position gasket and cover, fit bolts and working
in a diagonal sequence, progressively tighten
differential rear cover bolts to 45 Nm (33 lbf.ft).
3. Fit differential assembly.
FINAL DRIVE, REPAIRS, Differential
Bush - differential mounting - each
$% 51.15.41
Remove
1. Raise vehicle on lift.
2. Disconnect battery earth lead.
3. Remove rear propeller shaft.
DRIVESHAFTS, REPAIRS, Propeller
4. Release clips securing differential breather
pipe to body.
5. Support rear differential on jack.
M51 0143