L322 Range Rover Service Procedures
FINAL DRIVE
51-10
REPAIRS
Oil seal - pinion
$% 51.20.01
Remove
1. Raise vehicle on lift.
2. Remove exhaust system.
- Td6, REPAIR, Exhaust system and
mountings.
3. Remove 8 nuts securing centre heat shield and
remove shield.
4. Remove 8 hexagonal headed screws securing
fuel tank heat shield and remove shield.
5. Reference mark propeller shaft and differential
to aid reassembly.
6. Remove 6 nuts securing propeller shaft to
differential flange.
7. Remove 2 nuts securing propeller shaft support
bearing, lower the propeller shaft, release
flange from differential then temporarily support
the bearing and secure with nuts.
8. Remove and discard locking plate.
M47 0406