L322 Range Rover Service Procedures
GENERAL DATA
04-15
Brakes
Type
Servo assisted, self-adjusting with front/rear split hydraulic system, pin
sliding calipers and dynamic stability control
Disc type and diameter:
⇒
Front - ventilated
⇒
Rear - solid
344 mm (13.5 in)
354 mm (13.9 in)
Front disc thickness:
⇒
New
⇒
Service limit
⇒
Thickness variation
30.0 mm (1.18 in)
28.4 mm (1.12 in)
0.010 mm (0.0004 in)
Rear disc thickness:
⇒
New
⇒
service limit
⇒
Thickness variation
12.0 mm (0.47 in)
10.4 mm (0.41 in)
0.010 mm (0.0004 in)
Maximum disc run-out:
⇒
Front
⇒
Rear
0.073 mm (0.0028 in) with wheel fitted
0.075 mm (0.003 in) with wheel fitted
Minimum pad material thickness - Front and rear:
3.0 mm (0.12 in)
Handbrake - Type
Drum in hat, manually adjusted, operated by twin cables
Handbrake drum diameter
210 mm (8.3 in)
Master cylinder bore diameter:
⇒
Primary
⇒
Secondary
27 mm (1.1 in)
20.6 mm (0.8 in)
Brake servo boost ratio
5.6 :1
Dynamic stability control - Make/type
Bosch DSC 5.7 with ABS, Electronic Brake Force Distribution (EBD),
Emergency Brake Assist (EBA), Electronic Traction Control (ETC), Hill
Descent Control (HDC), Engine Drag Control (EDC), Cornering Brake
Control (CBC) and Dynamic Stability Control (DSC)
Hill descent control (HDC) speeds - Closed throttle,
brakes released:
⇒
Low range - Forward
⇒
High range - Forward
⇒
Low range - Reverse
⇒
High range - Reverse
6 km/h (4 mph)
10 km/h (6.2 mph)
3.5 km/h (2.2 mph)
6 km/h (4 mph)
