LR3/Disco 3
Remove the 3 bolts and 2 nuts.
4 .
CAUTION: Mark the position of the driveshaft flange in relation to the drive pinion flange.
CAUTION: To avoid damage to the joint or gaiter, do not allow the driveshaft to hang.
Release the driveshaft from the rear axle drive flange.
Remove and discard the 4 Torx bolts.
5 .
CAUTION: Make sure the weight of the axle is always supported.
Using a suitable jack, lower the front of the axle.
Remove the axle front retaining bolt.
6 .
Using the special tools, remove the axle housing bushing.