LR3/Disco 3
Input Shaft Seal (37.23.06)
Special Service Tools
Seal extractor
308-615
Impulse extractor
100-012 (LRT-99-004)
Seal installer
308-618
Removal
Published : Jul 13, 2004
1 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
2 .
Remove the clutch slave cylinder and release bearing assembly. For additional information, refer
to
Clutch Slave Cylinder (33.35.01)
(Section 308-02)
3 .
NOTE :
The screw holes are located through the rubber membrane.
Locate the hole for the extraction tool screw.