LR3/Disco 3
Installation
1 .
Install the gas discharge module.
Connect the electrical connector.
Tighten the 2 screws.
2 .
Install the gas discharge module cover.
Install the seal.
Tighten the screws.
3 .
Install the turn signal indicator bulb.
Secure the bulb holder.
Install the cover.
4 .
Install the side marker bulb.
Install the bulb holder.
5 .
Install the side lamp bulb.
Install the bulb holder.
6 .
Install the headlamp outer bulb.
Connect the electrical connector.
Install the cover.
Install the headlamp outer retaining clip.
7 .
CAUTION: Make sure the seal is installed correctly.
Install the headlamp inner bulb.
Secure with the clip.
Connect the electrical connector.
Install the cover.
8 .