Assembling Intermediate Gears for LT230Q Transfer Box
TRANSFER BOX
44
OVERHAUL
24. Apply Hylosil RTV 102 sealant to mating flange
of high/low selector housing.
25. Fit housing ensuring that high/low selector
finger is located in recess in high/low selector
shaft.
26. Fit 6 bolts and tighten to 25 Nm (18 lbf.ft).
Intermediate gears
1. Insert a new collapsible spacer into
intermediate gears, fit bearings into bearing
tracks.
2. Wrap a suitable length of wire around
intermediate gears and using assistance, lower
gears into main casing ensuring that they are
meshing with input and differential gears.
CAUTION: Do not remove wire at this
stage.