Range Rover P38
CRUISE CONTROL
5
REPAIR
CABLE - CRUISE CONTROL - UP TO 99MY
Service repair no - 19.75.10
Remove
1. Release cable from actuator. Disengage adjuster
from actuator abutment bracket.
2. Remove split pin and clevis pin from cable
trunnion.
3. Remove ’C’ clip securing cable to abutment
bracket. Remove cable.
Refit
4. Position cable through abutment bracket. Secure
with ’C’ clip.
5. Position cable trunnion to throttle linkage.
Secure with clevis pin and split pin.
6. Engage cable adjuster to actuator abutment
bracket. Connect cable to actuator diaphragm.
7. Adjust cruise control cable.
See CRUISE
CONTROL, Adjustment.
CABLE - CRUISE CONTROL - FROM 99MY
Service repair no - 19.75.10
Remove
1. Disconnect inner cable from actuator.
2. Release cable from actuator mounting bracket.
3. Release cable from 2 support clips.