landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

CABLE - CRUISE CONTROL - UP TO 99MY > < BRAKE AND CLUTCH PEDAL SWITCHES/VENT VALVES - CRUISE CONTROL
Page 461
background image

19

FUEL SYSTEM

NEW RANGE ROVER

4

REPAIR

5. Disconnect vacuum hose and multiplug from

switch.

NOTE: Vacuum hose fitted to petrol
variants only.

6. Remove switch/vent valve.

Refit

7. Reverse removal procedure.

NOTE: The switch/vent valve is factory set
and does not require adjustment in
service.

CRUISE CONTROL - SWITCH
INVERTER/CONVERTER

Service repair no - 19.75.22

NOTE: Inverter is used on petrol, converter
on diesel. Units are in same position and
are visually similar. Illustration 19M7054

shows petrol condition, diesel vehicles do not
have the cruise control ECU.

Remove

1. Remove fascia closing panel.

See CHASSIS

AND BODY, Repair.

2. Release inverter/converter multiplug from

bracket.

3. Remove inverter/converter from multiplug.

Refit

4. Reverse removal procedure.

CABLE - CRUISE CONTROL - UP TO 99MY > < BRAKE AND CLUTCH PEDAL SWITCHES/VENT VALVES - CRUISE CONTROL