Range Rover P38
CRUISE CONTROL
1
REPAIR
CRUISE CONTROL ECU
Service repair no - 19.75.49
Remove
1. Remove fascia closing panel.
See CHASSIS
AND BODY, Repair.
2. Remove 2 bolts securing ECU bracket to fascia.
Release bracket to gain access to fixings.
3. Disconnect multiplug from ECU.
4. Remove 2 bolts securing ECU. Remove ECU.
Refit
5. Reverse removal procedure.
CRUISE CONTROL ACTUATOR
Service repair no - 19.75.05
Remove
1. Disconnect vacuum hose from actuator.
2. Disconnect control cable from ball joint on
actuator diaphragm.
3. Remove nut securing actuator to bracket.
Remove actuator.
Refit
4. Position actuator to bracket. Secure with nut.
5. Connect vacuum hose. Secure cable to actuator
ball joint.
6. Adjust cruise control cable.
See CRUISE
CONTROL, Adjustment.