Range Rover P38
33
CLUTCH
NEW RANGE ROVER
8
REPAIR
SLAVE CYLINDER - FROM 97MY
Service repair no - 33.35.01
Remove
1. Raise front of vehicle.
WARNING: Support on safety stands.
2. Remove gearbox RH acoustic cover.
See
CHASSIS AND BODY, Repair.
3. Position container to collect fluid spillage.
CAUTION: Do not allow brake fluid to
contact painted surfaces. Paint damage
will occur. Thoroughly clean spillages with
clean, warm water.
4. Release pipe from clip.
5. Remove pipe union from slave cylinder.
CAUTION: Plug the connections.
6. Remove 2 bolts securing slave cylinder to clutch
housing.
7. Remove slave cylinder from push rod.
Refit
8. Ensure mating surfaces of slave cylinder and
clutch housing are clean.
9. Clean pushrod.
10. Fit slave cylinder to push rod and align to clutch
housing.
11. Fit bolts securing slave cylinder to clutch housing
and tighten to
25 Nm (18lbf.ft)
12. Remove plugs from slave cylinder and pipe
union.
13. Clean pipe union and slave cylinder.
14. Connect and tighten pipe union to slave cylinder.
15. Secure pipe to clip.
16. Bleed clutch system.
See this section.
17. Fit gearbox RH acoustic cover.
See CHASSIS
AND BODY, Repair.
