Range Rover P38
33
CLUTCH
NEW RANGE ROVER
4
REPAIR
CLUTCH ASSEMBLY - DIESEL
Service repair no - 33.10.07
Remove
1. Remove gearbox assembly.
See MANUAL
GEARBOX, Repair.
2. Remove starter motor.
See ELECTRICAL,
Repair.
3. Release push rod gaiter from clutch lever.
4. Remove 2 bolts securing clutch slave cylinder.
Tie cylinder aside.
5. Release clutch fluid pipe from clips. Move pipe
bracket clear of clutch housing.
6. Remove 7 remaining bolts securing clutch
housing. Disengage release lever from release
bearing. Remove clutch housing.
NOTE: Spacer plate may become detached
from dowels but remain captive behind
flywheel.
7. If clutch cover is to be refitted, mark cover and
flywheel to aid re-assembly.
8. Fit LRT-12-106 to flywheel. Secure tool to
cylinder block with bolts.