Range Rover P38
SUPPLEMENTARY RESTRAINT SYSTEM
11
REPAIR
8. Remove bolt securing belt reel to ’B’ post.
Remove reel.
WARNING: Store pre-tensioner in
accordance with storage procedures. See
SUPPLEMENTARY RESTRAINT SYSTEM,
Precautions.
Refit
9. Fit reel, fit bolt and tighten to
32 Nm (24 lbf.ft).
10. Connect pre-tensioner multiplug and secure to
inner sill.
11. Fit front carpet retainer.
12. Extend belt and secure belt guide to ’B’ post.
13. Locate belt to upper mounting, fit nut and tighten
to
22 Nm (16 lbf.ft).
14. Fit cover to upper mounting.
15. Position belt to seat mounting, fit bolt and tighten
to
32 Nm (24 lbf.ft).
16. Fit ’B’ post lower finisher
See CHASSIS AND
BODY, Repair.
17. Connect battery, earth lead last.
18. Check SRS using TestBook.
AIRBAG - SIDE IMPACT - from 99MY
Service repair no - 76.74.31 - Driver’s side
Service repair no - 76.74.32 - Passenger’s side
Remove
WARNING: See SRS safety precautions
before commencement of repair. See
SUPPLEMENTARY RESTRAINT SYSTEM,
Precautions.
1. Remove squab cover and squab foam as an
assembly.
See SEATS, Repair.
2. Release airbag harness from clip.
3. Remove 2 nuts securing airbag.
4. Release and remove airbag.
WARNING: Store airbag module in
accordance with storage procedures. See
SUPPLEMENTARY RESTRAINT SYSTEM,
Precautions.
