Standard reference value table
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Dynamic Stability Control › Standard reference value table
BrakesStandard reference value table · page 1 of 4
Courtesy of MAZDA MOTORS CORP.
STANDARD REFERENCE VALUE TABLE
| Terminal | Signal name Connected to | Measured item | Measured terminal (measured condition) | Standard | Inspection item (s) | |
| A | Ground (ABS motor) | Ground point | Continuity | A-ground point | Continuity detected | • Wiring harness (A- ground point) |
| B | Power supply (ABS motor operation) | Battery | Voltage | Under any condition | B+ | • Wiring harness (B- battery) |
| C | Power supply (solenoid operation) | Battery | Voltage | Under any condition | B+ | • Wiring harness (C- battery) |
| D | Ground (DSC system) | Ground point | Continuity | D-ground point | Continuity detected | • Wiring harness (D-ground point) |
| E | LF wheel- speed sensor (ground) | LF ABS wheel-speed sensor | Continuity | E-LF ABS wheel-speed sensor connector terminal B | Continuity detected | • Wiring harness (E-LF ABS wheel- speed sensor connector terminal B) |
| F | LF wheel- speed sensor (single) | LF ABS wheel-speed sensor | Continuity | F-LF ABS wheel-speed sensor connector terminal A | Continuity detected | • Wiring harness (F-LF ABS wheel- speed sensor connector terminal A) |
Parts & tools for this job For 2006 Mazda MX-5
- PARTBrake padsSearch: Mazda MX-5 2006 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
As an Amazon Associate we earn from qualifying purchases.