Standard reference value table (page 3 of 4)
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Dynamic Stability Control
BrakesStandard reference value table · page 3 of 4
| B) | ||||||
| M | RF wheel- speed sensor (signal) | RF ABS wheel-speed sensor | Continuity | M-RF ABS wheel-speed sensor connector terminal A | Continuity detected | • Wiring harness (M-RF ABS wheel- speed sensor connector terminal A) |
| N | Brake switch Brake switch | Voltage | N-ground point (Brake pedal depressed) | B+ | • Wiring harness (N-brake switch) • Brake switch | |
| N-ground point (Brake pedal not depressed) | 1 V or less | - | ||||
| O | RF wheel- speed sensor (ground) | RF ABS wheel-speed sensor | Continuity | O-RF ABS wheel-speed sensor connector terminal B | Continuity detected | • Wiring harness (O-RF ABS wheel- speed sensor connector terminal B) |
| P | DSC OFF switch | DSC OFF switch | Continuity | P-DSC OFF switch connector terminal A | Continuity detected | • Wiring harness (P-DSC OFF switch connector terminal A) |
| Q | - | - | - | - | - | - |
| R | - | - | - | - | - | - |
| S | - | - | - | - | - | - |
| T | - | - | - | - | - | - |
| U | - | - | - | - | - | - |
Parts & tools for this job For 2006 Mazda MX-5
- PARTBrake padsSearch: Mazda MX-5 2006 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
As an Amazon Associate we earn from qualifying purchases.