Oil cooler removal/installation [lf]
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Lubrication › Oil cooler removal/installation [lf]
Courtesy of MAZDA MOTORS CORP.
OIL COOLER REMOVAL/INSTALLATION [LF]
WARNING: Hot engine and engine oil can cause severe burns. Turn off the engine and wait until it and the engine oil have cooled.
A vehicle that is lifted but not securely supported on safety stands is dangerous. It can slip or fall, causing death or serious injury. Never work around or under a lifted vehicle if it is not securely supported on safety stands.
Continuous exposure to USED engine oil has caused skin cancer in laboratory mice. Protect your skin by washing with soap and water immediately after working with engine oil.
- Remove the battery cover.
- Disconnect the negative battery cable.
- Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT [LF] .)
- Remove the under cover. (See TRANSVERSE MEMBER REMOVAL/INSTALLATION .)
Parts & tools for this job For 2006 Mazda MX-5
- PARTOil filterSearch: Mazda MX-5 2006 oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Mazda MX-5 engine oil
As an Amazon Associate we earn from qualifying purchases.