Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Oil pan removal note

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Lubrication › Oil pan removal note
EngineOil pan removal note · page 1 of 2

Courtesy of MAZDA MOTORS CORP.

OIL PAN REMOVAL NOTE

NOTE: Lift up the engine approx. 25 mm {0.98 in} to assure clearance for the oil pan removal, then remove the oil pan.

  1. Remove the windshield wiper arm. (See WIPER ARM AND BLADE REMOVAL/INSTALLATION .)
  2. Remove the cowl grille. (See COWL GRILLE REMOVAL/INSTALLATION .)
  3. Remove the side cowl grille. (See SIDE COWL GRILLE REMOVAL/INSTALLATION .)
  4. Remove the engine compartment service hole cover. (See EGR VALVE REMOVAL/INSTALLATION [LF] .)
  5. Remove the front tires.
  6. Support the engine using the SST.
ENGINE – Lubrication [LF] – figure
Fig. 7: Supporting Engine Using SST
Courtesy of MAZDA MOTORS CORP.
  1. Remove the engine mount rubber installation nuts.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.