Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Oil pan installation note

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Lubrication › Oil pan installation note
EngineOil pan installation note · page 1 of 5
ENGINE – Lubrication [LF] – figure
Fig. 9: Removing Oil Pan Using Separator Tool
Courtesy of MAZDA MOTORS CORP.
  1. Remove the oil pan.

OIL PAN INSTALLATION NOTE

CAUTION: Apply the silicon sealant in a single, unbroken line around the whole perimeter.

Using bolts with the old seal adhering could cause cracks in the housing.

  1. Completely clean and remove any oil, dirt, sealant or other foreign material that may be adhering to the housing and oil pan.
  2. When reusing the oil pan installation bolts, clean any old sealant from the bolts.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.