Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Oil pressure inspection [lf]

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Lubrication › Oil pressure inspection [lf]
EngineOil pressure inspection [lf] · page 1 of 3

Oil and oil filter replacement: 4.45 L {4.70 US qt, 3.92 Imp qt}

Total (dry engine): 4.75 L {5.02 US qt, 4.18 Imp qt}

Engine oil capacity (approx. quanity) (6MT)

Oil replacement: 4.05 L {4.28 US qt, 3.56 Imp qt}

Oil and oil filter replacement: 4.55 L {4.81 US qt, 4.00 Imp qt}

Total (dry engine): 4.85 L {5.12 US qt, 4.27 Imp qt}

*1 :Applied VIN (Assumed)

JM1 NC15F*7# 100001-130613

JM1 NC16F*7# 100001-130613

JM1 NC25F*7# 100001-130613

JM1 NC26F*7# 100001-130613

*2 :Applied VIN (Assumed)

JM1 NC15F*7# 130614-

JM1 NC16F*7# 130614-

JM1 NC25F*7# 130614-

JM1 NC26F*7# 130614-

  1. Install the oil filler cap.
  2. Start the engine and confirm that there is no oil leakage.
    • If there is oil leakage, repair or replace the applicable part.
  3. Inspect the oil level. (See ENGINE OIL LEVEL INSPECTION [LF] .)

OIL PRESSURE INSPECTION [LF]

WARNING: Hot engine and engine oil can cause severe burns. Turn off the engine and wait until it and the engine oil have cooled.

A vehicle that is lifted but not securely supported on safety stands is dangerous. It can slip or fall, causing death or serious injury. Never work around or under a lifted vehicle if it is not securely supported

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.