Engine oil replacement [lf] (page 2 of 2)
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Lubrication
Oil pan drain plug tightening torque
30-41 N.m {3.1-4.1 kgf.m, 23-30 ft.lbf}
NOTE: The amount of residual oil in the engine can vary according to factors such as the replacement method and oil temperature. Verify the oil level after engine oil replacement.
- Refill the following type and amount of the engine oil.
NOTE: The maintenance intervals on scheduled maintenance table (See SCHEDULED MAINTENANCE ) can only be supported with the use of the following oils.
ENGINE OIL SPECIFICATION
Item
U.S.A. and CANADA
Except U.S.A. and CANADA
Engine oil grade
API SL or ILSAC
Engine oil viscosity
5W-20
Engine oil capacity (approx. quantity) (AT, 5MT)*1
Oil replacement: 3.9 L {4.1 US qt, 3.4 Imp qt}
Oil and oil filter replacement: 4.3 L {4.5 US qt, 3.8 Imp qt}
Total (dry engine): 4.6 L {4.9 US qt, 4.0 Imp qt}
Engine oil capacity (approx. quanity) (AT, 5MT)*2
Oil replacement: 4.05 L {4.28 US qt, 3.56 Imp qt}
Parts & tools for this job For 2006 Mazda MX-5
- PARTEngine gasket setSearch: Mazda MX-5 2006 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.